DIY Tips to Install a Garage Door Opener

There are times when you have to manage some home improvement projects on your own. Installing a new garage door opener may be one of them. Most people do not realize that it is very easy to install a garage door opener. In this post, we have explained how you should do it without experiencing any problems. However, if you face any challenges, it’s better to consult Orlando garage door pros to get the job done.


Remove the Old Door Opener 


The first step of the process is to remove your old door opener. However, before you get started, it is important to carefully read the instructions. In order to remove the garage door opener, you will have to unplug it. You will need another person for this job.


You need to disconnect the sensors, while loosening the bolts which hold the motor to the bracket. Your friend needs to disconnect the hardware at your garage door. Once you’ve removed the bolts, you need to lower the assembly together.


It is important to remove all the old brackets. You will also need to clear some space in your garage to assemble the new unit. You should lay out all the screws, hardware and other pieces, while following every step in the directions. You should avoid taking any shortcuts.


Measure, Mark & Mount the Bracket 


In order to accomplish this task, you will have to find the centerline of the garage door. Once you’ve done this, you need to extend the centerline up to the header. It is important to mark specific holes for mounting the bracket. You should use a torpedo level to make sure the surface is level. Before you start drilling pilot holes for bolts, you should wear safety glasses to protect your eyes. Using a socket driver, mount the bracket carefully.


Align the Track 


The front of the track needs to be attached to the bracket. The next step is to let the motor housing rest on top of a stepladder. You need to watch the track carefully, and make sure it’s at a perfect 90 degree angle to the garage door.


Secure the Motor, Finish Installation 


Once you’ve aligned the track, you should attach the motor to metal hanging straps. Then, you need to secure the other end of these straps to the rafter of ceiling joints. You should secure the opener arm and track at your garage door.


Last but not the least, you need to install motion sensors about 4-6 inches above the ground’s surface. You should connect the wires of the sensors, and even the switch. In the end, you should plug in the garage door opener and test your machine.


As mentioned earlier, you should consult Orlando garage door pros when you experience any problems. Professionals make sure you’re able to install a garage door opener without experiencing any problems.


Before choosing a company in Orlando, you should conduct a good research. This helps you chose a company with experienced, reputed and skilled professionals. Spending some research allows you to make an informed choice.

Process of Repairing and Replacing Garage Door Openers

garage-door-openers4Garage door openers are mainly used for convenience, safety, and security. An average opener can last for nearly 12 years. With regular maintenance, you can extend the life of your automatic garage opener. Periodic maintenance of your garage door opener ensures that it functions efficiently. Repair or replacement of the existing garage door opener is more cost effective and easy process as compared to installing a new one. When it comes to garage door opener repair, there are many simple steps that do not require much mechanical knowledge and skills. Here are a few instructions that you can follow in order to repair or replace your garage door opener by yourself. Fortunately, there are technicians in Cleveland who are always ready to carry out maintenance work on garage openers. Nonetheless, here a five tips on maintaining a garage door opener:

1. Know your garage doors opener system

Garage door openers fall into three broad categories: chain-drive, belt-drive and screw-drive systems. The first type uses a metal chain to operate the door. The second type works with a rubber belt while the third one utilizes a threaded steel rod. With this knowledge, you can easily seek help from your garage installation firm.

2. Inspect the opener visually

Make a point of virtually inspecting your garage opener. A visual inspection will help you identify parts that are broken or worn out. Inspect the tracks, fasteners, cables and mounting brackets. Note down anything that you feel needs adjustment or replacement. For loose parts, a little tightening will do just fine.

3. Check its electrical connection

Garage door openers rely on electric power to run their motors. Check whether the electric cord linking the opener to power supply is intact. If the cable has fraying, you might have to replace it. Some openers come with battery backup kits. If yours has such a kit, check whether the battery has enough power. Replace the batteries if required.

4. Check the auto-reverse system

This system makes the door reverse its direction whenever there is an obstacle on its path. There are two electronic eyes, which must be in alignment. Confirm that they align and if they do not, realign them. At the same time, clean both sets of eyes. If one or both are not working, replace them immediately. Thereafter, test the auto-reverse system by placing obstacles before and during the garage door closure.

5. Add lubricant

Garage openers have moving parts that must have adequate oiling for a smooth operation. You need to spray lubricant to rollers, screws and the chain.

A professional technician will help in solving any kind of issues that you may face with your garage door opener. Do not consider cost too much, Quality is the key aspect. They use the latest technology to rectify any type of issue that your opener may face. A good garage door company ensures that they respond to your complaint without any delay. The technicians are fully equipped so that they can solve any kind of issues that you may have with your garage door all the time.

Replace Garage Door Opener Cincinnati

garage-door14Garage doors are an integral part of your home furnishings, but unfortunately most of the time they are left unattended for each household repair is undertaken. Hence many people are facing problems such as sticky or stuck doors, opening doors or its unjustified not stay open.

Regarding sticky or jammed doors, it is usually because frames or channels through which the deformed door slides and they can be easily repaired without too much trouble. Usually, with a simple tools box to hammer, a few key nut and bolts and a screwdriver, you can fix most of these problems by yourself. The erratic opening and closing of the door could be due to down a key in the control of the opener or there might be a problem with the opening circuit of which can be easily fixed. For more information you can check Replace Garage Door Opener Cincinnati online.

If you are a DIY addict then you’ll probably want to replace your garage door by yourself. This is not an easy task but with the proper tools and decent knowledge of their functionality, you should be able to remove it. You will need basic tools like a drill, hammer, level, screwdriver, locking pliers, and of course, a ladder.

garage-door13There are many different types of garage doors that are installed a little differently – but in general, most garage doors always undergo the same procedure. The first thing you need to do is remove the old doors. To do this, you must first bring the door down and release the spring tension and detach the open. Remember, this, your garage door become extremely heavy. Refer to your manual for the proper instructions on how to release the spring. Always keep in mind that the springs are very dangerous and the door is extremely heavy once the spring has been released.

Once you have done, you can now remove the sections of the door and remove them one by one. Be careful not to hurt yourself and remember that you should remove all equipment before installing your new door, do not try to install your new door on old tracks. If you have never previously replaced (or seen someone replacing) a garage door, it is recommended to watch some educational videos to get an idea of ​​what should be done. Then you can refer to the manual of your garage door for further instructions. Make sure you go over all the first things before starting your project. You must have a good general idea of ​​what you will do – not guess act then undo everything you did.

Be sure to install electric opener and sensor eyes – these are absolutely necessary, and if you have children or pets, it is illegal not to have them. It is important not cheap out on your garage door or you’ll start having minor problems which will soon turn into major problems. It is recommended that you spend a little more money for a lasting mark instead of not wearing expensive that will be replaced after 6 months.

You’re supposed to spend the entire day replace your new doors. Yes, a professional can do it in 3 hours, but you will always have the satisfaction of knowing that you were the one who installed the door himself.

Hiring a professional to repair garage door is what you need to consider. Actually they have the skills and knowledge necessary to detect what is wrong and fix it completely and safely. Do not attempt to repair it yourself in case you don’t know what you do because you can damage the door or serious injury. Moreover, it probably does not help that you do not have all the tools that a professional has.

A professional can make sure you have proper operation furthermore, work appropriately by using the right parts and remove harmed parts that are difficult to identify if you don’t realize what you’re doing. If the point of interest is not done legitimately, it can bring the whole door to tumble off the track. This can be dangerous for you, your vehicle and your home.

Obviously, everybody needs to know the expense. Garage door prices are less expensive today than they have ever been. A spring roll or replacement need can be less expensive if an expert replaces than if you attempt to do it without anyone’s help. Now and then you do not even need to pay travel expenses if your garage door repair dealer sends people to assess the problem.

How to Fix Garage Floor Cracks Quickly

If you have concrete epoxy floor inside your garage, you need to learn about how you can take a good care of your floor. You also need to learn about how you can fix any small or large cracks that may occur on your floor. There is no complicated procedure on how you can solve any problems with your concrete floor. You can simply follow these simple tips for fixing garage floor cracks quickly.



1. Prepare all important materials

It is important for you to follow this tip, so you can complete your project quickly. Before you can start fixing any cracks from your floor, you need to prepare all important materials. There are some important tools that can accelerate your project easily, for example clean broom, wire brush, clean knife, water hose, and also crack filling compound. It is very important for you to select the best crack filling compound that is made from recommended materials, including polyurethane and also epoxy.

2. Clean the area completely

Before you start applying the crack filling compound on your floor, you need to prepare the area properly. Make sure that you clean the area with your own broom, in order to remove any dust, dirt, and other impurities from your floor. When it is necessary, you can also use dust brush and vacuum cleaner. Both devices are very useful to help you keep your floor as clean as possible. Don’t forget to dry your floor before you start filling the crack.

3. Fill the crack

Once the area is ready, you can start filling any cracks with repair compound. You can use caulking gun or putty knife when you want to apply this compound to your floor. Make sure that the filling compound can stay inside any cracks on your garage floor. Different compounds may have their own drying time, so you have to read the instructions from the packaging very carefully. You can let the compound dry completely before you can start using you garage for storing any of your items.

After you are done with the process, you can also use a grinder for creating smooth surface on your garage floor. When you want to improve the overall look of your garage, you can also use epoxy coating or paint on your floor, so you can hide all cracks or holes on your floor completely. This simple tip can create good finishing on the surface of your floor easily.